Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/ethernet/emulex/benet/be_main.c
	net/core/sysctl_net_core.c
	net/ipv4/inet_diag.c

The be_main.c conflict resolution was really tricky.  The conflict
hunks generated by GIT were very unhelpful, to say the least.  It
split functions in half and moved them around, when the real actual
conflict only existed solely inside of one function, that being
be_map_pci_bars().

So instead, to resolve this, I checked out be_main.c from the top
of net-next, then I applied the be_main.c changes from 'net' since
the last time I merged.  And this worked beautifully.

The inet_diag.c and sysctl_net_core.c conflicts were simple
overlapping changes, and were easily to resolve.

Signed-off-by: David S. Miller <[email protected]>

Author: davem330

Documentation/devicetree/bindings/arm/exynos/power_domain.txt

@@ -22,6 +22,8 @@ Optional Properties:
 	- pclkN, clkN: Pairs of parent of input clock and input clock to the
 		devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
 		are supported currently.
+- power-domains: phandle pointing to the parent power domain, for more details
+		 see Documentation/devicetree/bindings/power/power_domain.txt
 
 Node of a device using power domains must have a power-domains property
 defined with a phandle to respective power domain.

Documentation/devicetree/bindings/arm/sti.txt

@@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties:
 Required root node property:
 compatible = "st,stih407";
 
+Boards with the ST STiH410 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih410";
+
 Boards with the ST STiH418 SoC shall have the following properties:
 Required root node property:
 compatible = "st,stih418";

Documentation/devicetree/bindings/power/power_domain.txt

@@ -19,6 +19,16 @@ Required properties:
    providing multiple PM domains (e.g. power controllers), but can be any value
    as specified by device tree binding documentation of particular provider.
 
+Optional properties:
+ - power-domains : A phandle and PM domain specifier as defined by bindings of
+                   the power controller specified by phandle.
+   Some power domains might be powered from another power domain (or have
+   other hardware specific dependencies). For representing such dependency
+   a standard PM domain consumer binding is used. When provided, all domains
+   created by the given provider should be subdomains of the domain
+   specified by this binding. More details about power domain specifier are
+   available in the next section.
+
 Example:
 
 	power: power-controller@12340000 {
@@ -30,6 +40,25 @@ Example:
 The node above defines a power controller that is a PM domain provider and
 expects one cell as its phandle argument.
 
+Example 2:
+
+	parent: power-controller@12340000 {
+		compatible = "foo,power-controller";
+		reg = <0x12340000 0x1000>;
+		#power-domain-cells = <1>;
+	};
+
+	child: power-controller@12340000 {
+		compatible = "foo,power-controller";
+		reg = <0x12341000 0x1000>;
+		power-domains = <&parent 0>;
+		#power-domain-cells = <1>;
+	};
+
+The nodes above define two power controllers: 'parent' and 'child'.
+Domains created by the 'child' power controller are subdomains of '0' power
+domain provided by the 'parent' power controller.
+
 ==PM domain consumers==
 
 Required properties:

Documentation/devicetree/bindings/serial/of-serial.txt renamed to Documentation/devicetree/bindings/serial/8250.txt

@@ -0,0 +1,19 @@
+ETRAX FS UART
+
+Required properties:
+- compatible : "axis,etraxfs-uart"
+- reg: offset and length of the register set for the device.
+- interrupts: device interrupt
+
+Optional properties:
+- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
+  line respectively.
+
+Example:
+
+serial@b00260000 {
+	compatible = "axis,etraxfs-uart";
+	reg = <0xb0026000 0x1000>;
+	interrupts = <68>;
+	status = "disabled";
+};

Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt

@@ -12,6 +12,9 @@ I. For patch submitters
 
        [email protected]
 
+     and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
+     all of the DT maintainers.
+
   3) The Documentation/ portion of the patch should come in the series before
      the code implementing the binding.
 

Documentation/devicetree/bindings/submitting-patches.txt

@@ -20,13 +20,15 @@ amlogic	Amlogic, Inc.
 ams	AMS AG
 amstaos	AMS-Taos Inc.
 apm	Applied Micro Circuits Corporation (APM)
+arasan	Arasan Chip Systems
 arm	ARM Ltd.
 armadeus	ARMadeus Systems SARL
 asahi-kasei	Asahi Kasei Corp.
 atmel	Atmel Corporation
 auo	AU Optronics Corporation
 avago	Avago Technologies
 avic	Shanghai AVIC Optoelectronics Co., Ltd.
+axis	Axis Communications AB
 bosch	Bosch Sensortec GmbH
 brcm	Broadcom Corporation
 buffalo	Buffalo, Inc.

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -26,6 +26,11 @@ Optional properties:
 - atmel,disable : Should be present if you want to disable the watchdog.
 - atmel,idle-halt : Should be present if you want to stop the watchdog when
 	entering idle state.
+	CAUTION: This property should be used with care, it actually makes the
+	watchdog not counting when the CPU is in idle state, therefore the
+	watchdog reset time depends on mean CPU usage and will not reset at all
+	if the CPU stop working while it is in idle state, which is probably
+	not what you want.
 - atmel,dbg-halt : Should be present if you want to stop the watchdog when
 	entering debug state.
 

Documentation/devicetree/bindings/watchdog/atmel-wdt.txt

@@ -1030,6 +1030,16 @@ F:	arch/arm/mach-mxs/
 F:	arch/arm/boot/dts/imx*
 F:	arch/arm/configs/imx*_defconfig
 
+ARM/FREESCALE VYBRID ARM ARCHITECTURE
+M:	Shawn Guo <[email protected]>
+M:	Sascha Hauer <[email protected]>
+R:	Stefan Agner <[email protected]>
+L:	[email protected] (moderated for non-subscribers)
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
+F:	arch/arm/mach-imx/*vf610*
+F:	arch/arm/boot/dts/vf*
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
@@ -1188,6 +1198,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
 M:	Jason Cooper <[email protected]>
 M:	Andrew Lunn <[email protected]>
 M:	Sebastian Hesselbarth <[email protected]>
+M:	Gregory Clement <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-dove/
@@ -1730,7 +1741,7 @@ S:	Maintained
 F:	drivers/net/ethernet/atheros/
 
 ATM
-M:	Chas Williams <[email protected]>
+M:	Chas Williams <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 L:	[email protected]
 W:	http://linux-atm.sourceforge.net
@@ -2107,7 +2118,6 @@ F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
 M:	Christian Daudt <[email protected]>
-M:	Matt Porter <[email protected]>
 M:	Florian Fainelli <[email protected]>
 L:	[email protected]
 T:	git git://github.com/broadcom/mach-bcm

MAINTAINERS

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

Makefile

@@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
 machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
+machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove
 machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
 machine-$(CONFIG_ARCH_EFM32)		+= efm32

arch/arm/Makefile

@@ -301,3 +301,11 @@
 	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 };
+
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -24,11 +24,3 @@
 &mmc1 {
 	vmmc-supply = <&ldo3_reg>;
 };
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};

arch/arm/boot/dts/am335x-bone.dts

@@ -328,6 +328,10 @@
 	dual_emac_res_vlan = <3>;
 };
 
+&phy_sel {
+	rmii-clock-ext;
+};
+
 &mac {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;

arch/arm/boot/dts/am335x-lxm.dts

@@ -99,23 +99,23 @@
 	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};

arch/arm/boot/dts/am33xx-clocks.dtsi

@@ -107,47 +107,47 @@
 	ehrpwm0_tbclk: ehrpwm0_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm1_tbclk: ehrpwm1_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm2_tbclk: ehrpwm2_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm3_tbclk: ehrpwm3_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <4>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm4_tbclk: ehrpwm4_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <5>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm5_tbclk: ehrpwm5_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <6>;
 		reg = <0x0664>;
 	};

arch/arm/boot/dts/am43xx-clocks.dtsi

@@ -494,12 +494,12 @@
 
 					pinctrl_usart3_rts: usart3_rts-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC8 periph B */
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 					};
 
 					pinctrl_usart3_cts: usart3_cts-0 {
 						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC10 periph B */
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -853,7 +853,7 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9260-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
 				clocks = <&udc_clk>, <&udpck>;
@@ -976,7 +976,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91sam9260.dtsi

@@ -124,11 +124,12 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9261-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&usb>, <&udc_clk>, <&udpck>;
-				clock-names = "usb_clk", "udc_clk", "udpck";
+				clocks = <&udc_clk>, <&udpck>;
+				clock-names = "pclk", "hclk";
+				atmel,matrix = <&matrix>;
 				status = "disabled";
 			};
 
@@ -262,7 +263,7 @@
 			};
 
 			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9260-bus-matrix";
+				compatible = "atmel,at91sam9260-bus-matrix", "syscon";
 				reg = <0xffffee00 0x200>;
 			};
 

arch/arm/boot/dts/at91sam9261.dtsi

@@ -69,7 +69,7 @@
 
 	sram1: sram@00500000 {
 		compatible = "mmio-sram";
-		reg = <0x00300000 0x4000>;
+		reg = <0x00500000 0x4000>;
 	};
 
 	ahb {
@@ -856,7 +856,7 @@
 			};
 
 			usb1: gadget@fff78000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9263-udc";
 				reg = <0xfff78000 0x4000>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
 				clocks = <&udc_clk>, <&udpck>;
@@ -905,7 +905,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91sam9263.dtsi

@@ -1116,7 +1116,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 
@@ -1301,7 +1300,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};