bpf: Add csum_level helper for fixing up csum levels

Add a bpf_csum_level() helper which BPF programs can use in combination
with bpf_skb_adjust_room() when they pass in BPF_F_ADJ_ROOM_NO_CSUM_RESET
flag to the latter to avoid falling back to CHECKSUM_NONE.

The bpf_csum_level() allows to adjust CHECKSUM_UNNECESSARY skb->csum_levels
via BPF_CSUM_LEVEL_{INC,DEC} which calls __skb_{incr,decr}_checksum_unnecessary()
on the skb. The helper also allows a BPF_CSUM_LEVEL_RESET which sets the skb's
csum to CHECKSUM_NONE as well as a BPF_CSUM_LEVEL_QUERY to just return the
current level. Without this helper, there is no way to otherwise adjust the
skb->csum_level. I did not add an extra dummy flags as there is plenty of free
bitspace in level argument itself iff ever needed in future.

Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Reviewed-by: Alan Maguire <[email protected]>
Acked-by: Lorenz Bauer <[email protected]>
Link: https://lore.kernel.org/bpf/279ae3717cb3d03c0ffeb511493c93c450a01e1a.1591108731.git.daniel@iogearbox.net

Author: borkmann

include/uapi/linux/bpf.h

@@ -3220,6 +3220,38 @@ union bpf_attr {
  *		calculation.
  *	Return
  *		Requested value, or 0, if flags are not recognized.
+ *
+ * int bpf_csum_level(struct sk_buff *skb, u64 level)
+ * 	Description
+ * 		Change the skbs checksum level by one layer up or down, or
+ * 		reset it entirely to none in order to have the stack perform
+ * 		checksum validation. The level is applicable to the following
+ * 		protocols: TCP, UDP, GRE, SCTP, FCOE. For example, a decap of
+ * 		| ETH | IP | UDP | GUE | IP | TCP | into | ETH | IP | TCP |
+ * 		through **bpf_skb_adjust_room**\ () helper with passing in
+ * 		**BPF_F_ADJ_ROOM_NO_CSUM_RESET** flag would require one	call
+ * 		to **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_DEC** since
+ * 		the UDP header is removed. Similarly, an encap of the latter
+ * 		into the former could be accompanied by a helper call to
+ * 		**bpf_csum_level**\ () with **BPF_CSUM_LEVEL_INC** if the
+ * 		skb is still intended to be processed in higher layers of the
+ * 		stack instead of just egressing at tc.
+ *
+ * 		There are three supported level settings at this time:
+ *
+ * 		* **BPF_CSUM_LEVEL_INC**: Increases skb->csum_level for skbs
+ * 		  with CHECKSUM_UNNECESSARY.
+ * 		* **BPF_CSUM_LEVEL_DEC**: Decreases skb->csum_level for skbs
+ * 		  with CHECKSUM_UNNECESSARY.
+ * 		* **BPF_CSUM_LEVEL_RESET**: Resets skb->csum_level to 0 and
+ * 		  sets CHECKSUM_NONE to force checksum validation by the stack.
+ * 		* **BPF_CSUM_LEVEL_QUERY**: No-op, returns the current
+ * 		  skb->csum_level.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure. In the
+ * 		case of **BPF_CSUM_LEVEL_QUERY**, the current skb->csum_level
+ * 		is returned or the error code -EACCES in case the skb is not
+ * 		subject to CHECKSUM_UNNECESSARY.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -3356,7 +3388,8 @@ union bpf_attr {
 	FN(ringbuf_reserve),		\
 	FN(ringbuf_submit),		\
 	FN(ringbuf_discard),		\
-	FN(ringbuf_query),
+	FN(ringbuf_query),		\
+	FN(csum_level),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
@@ -3433,6 +3466,14 @@ enum {
 	BPF_F_CURRENT_NETNS		= (-1L),
 };
 
+/* BPF_FUNC_csum_level level values. */
+enum {
+	BPF_CSUM_LEVEL_QUERY,
+	BPF_CSUM_LEVEL_INC,
+	BPF_CSUM_LEVEL_DEC,
+	BPF_CSUM_LEVEL_RESET,
+};
+
 /* BPF_FUNC_skb_adjust_room flags. */
 enum {
 	BPF_F_ADJ_ROOM_FIXED_GSO	= (1ULL << 0),

net/core/filter.c

@@ -2015,6 +2015,40 @@ static const struct bpf_func_proto bpf_csum_update_proto = {
 	.arg2_type	= ARG_ANYTHING,
 };
 
+BPF_CALL_2(bpf_csum_level, struct sk_buff *, skb, u64, level)
+{
+	/* The interface is to be used in combination with bpf_skb_adjust_room()
+	 * for encap/decap of packet headers when BPF_F_ADJ_ROOM_NO_CSUM_RESET
+	 * is passed as flags, for example.
+	 */
+	switch (level) {
+	case BPF_CSUM_LEVEL_INC:
+		__skb_incr_checksum_unnecessary(skb);
+		break;
+	case BPF_CSUM_LEVEL_DEC:
+		__skb_decr_checksum_unnecessary(skb);
+		break;
+	case BPF_CSUM_LEVEL_RESET:
+		__skb_reset_checksum_unnecessary(skb);
+		break;
+	case BPF_CSUM_LEVEL_QUERY:
+		return skb->ip_summed == CHECKSUM_UNNECESSARY ?
+		       skb->csum_level : -EACCES;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct bpf_func_proto bpf_csum_level_proto = {
+	.func		= bpf_csum_level,
+	.gpl_only	= false,
+	.ret_type	= RET_INTEGER,
+	.arg1_type	= ARG_PTR_TO_CTX,
+	.arg2_type	= ARG_ANYTHING,
+};
+
 static inline int __bpf_rx_skb(struct net_device *dev, struct sk_buff *skb)
 {
 	return dev_forward_skb(dev, skb);
@@ -6280,6 +6314,8 @@ tc_cls_act_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return &bpf_csum_diff_proto;
 	case BPF_FUNC_csum_update:
 		return &bpf_csum_update_proto;
+	case BPF_FUNC_csum_level:
+		return &bpf_csum_level_proto;
 	case BPF_FUNC_l3_csum_replace:
 		return &bpf_l3_csum_replace_proto;
 	case BPF_FUNC_l4_csum_replace:
@@ -6613,6 +6649,8 @@ lwt_xmit_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return &bpf_skb_store_bytes_proto;
 	case BPF_FUNC_csum_update:
 		return &bpf_csum_update_proto;
+	case BPF_FUNC_csum_level:
+		return &bpf_csum_level_proto;
 	case BPF_FUNC_l3_csum_replace:
 		return &bpf_l3_csum_replace_proto;
 	case BPF_FUNC_l4_csum_replace:

tools/include/uapi/linux/bpf.h

@@ -3220,6 +3220,38 @@ union bpf_attr {
  *		calculation.
  *	Return
  *		Requested value, or 0, if flags are not recognized.
+ *
+ * int bpf_csum_level(struct sk_buff *skb, u64 level)
+ * 	Description
+ * 		Change the skbs checksum level by one layer up or down, or
+ * 		reset it entirely to none in order to have the stack perform
+ * 		checksum validation. The level is applicable to the following
+ * 		protocols: TCP, UDP, GRE, SCTP, FCOE. For example, a decap of
+ * 		| ETH | IP | UDP | GUE | IP | TCP | into | ETH | IP | TCP |
+ * 		through **bpf_skb_adjust_room**\ () helper with passing in
+ * 		**BPF_F_ADJ_ROOM_NO_CSUM_RESET** flag would require one	call
+ * 		to **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_DEC** since
+ * 		the UDP header is removed. Similarly, an encap of the latter
+ * 		into the former could be accompanied by a helper call to
+ * 		**bpf_csum_level**\ () with **BPF_CSUM_LEVEL_INC** if the
+ * 		skb is still intended to be processed in higher layers of the
+ * 		stack instead of just egressing at tc.
+ *
+ * 		There are three supported level settings at this time:
+ *
+ * 		* **BPF_CSUM_LEVEL_INC**: Increases skb->csum_level for skbs
+ * 		  with CHECKSUM_UNNECESSARY.
+ * 		* **BPF_CSUM_LEVEL_DEC**: Decreases skb->csum_level for skbs
+ * 		  with CHECKSUM_UNNECESSARY.
+ * 		* **BPF_CSUM_LEVEL_RESET**: Resets skb->csum_level to 0 and
+ * 		  sets CHECKSUM_NONE to force checksum validation by the stack.
+ * 		* **BPF_CSUM_LEVEL_QUERY**: No-op, returns the current
+ * 		  skb->csum_level.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure. In the
+ * 		case of **BPF_CSUM_LEVEL_QUERY**, the current skb->csum_level
+ * 		is returned or the error code -EACCES in case the skb is not
+ * 		subject to CHECKSUM_UNNECESSARY.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -3356,7 +3388,8 @@ union bpf_attr {
 	FN(ringbuf_reserve),		\
 	FN(ringbuf_submit),		\
 	FN(ringbuf_discard),		\
-	FN(ringbuf_query),
+	FN(ringbuf_query),		\
+	FN(csum_level),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
@@ -3433,6 +3466,14 @@ enum {
 	BPF_F_CURRENT_NETNS		= (-1L),
 };
 
+/* BPF_FUNC_csum_level level values. */
+enum {
+	BPF_CSUM_LEVEL_QUERY,
+	BPF_CSUM_LEVEL_INC,
+	BPF_CSUM_LEVEL_DEC,
+	BPF_CSUM_LEVEL_RESET,
+};
+
 /* BPF_FUNC_skb_adjust_room flags. */
 enum {
 	BPF_F_ADJ_ROOM_FIXED_GSO	= (1ULL << 0),