Debugger silently fails to connect to target process on Arch

[bDarbonne]

Issue Description

Breakpoints do not work when running either a console or web application...most of the time.
On occasion, it will randomly begin running correctly. Even when stopping and immediately starting the project again.

Steps to Reproduce

dotnet new console
// set breakpoint
// debug project

or

dotnet new mvc
// set breakpoint in controller
// debug project

Expected Behavior

Program to stop execution on breakpoints selected

Actual Behavior

console -> Program runs to end of execution (this was a new console project)

mvc -> Breakpoint is grayed out and never hit
// hovering over the grayed out breakpoint gives the message: 'The breakpoint is pending and will be resolved when debugging starts.'

Logs

NOTE: These logs were from running a new mvc project

OmniSharp log

Starting OmniSharp server at 5/11/2020, 8:34:56 AM
Target: /[path]/[to]/[project]/demo

OmniSharp server started with Mono 6.4.0.
Path: /home/[user]/.vscode/extensions/ms-dotnettools.csharp-1.21.18/.omnisharp/1.35.1/omnisharp/OmniSharp.exe
PID: 4375

Starting OmniSharp on arch 0.0 (x64)
info: OmniSharp.Services.DotNetCliService
DotNetPath set to dotnet
[warn]: OmniSharp.MSBuild.Discovery.Providers.MonoInstanceProvider
It looks like you have Mono 6.4.0 or greater installed but MSBuild could not be found.
Try installing MSBuild into Mono (e.g. 'sudo apt-get install msbuild') to enable better MSBuild support, or upgrade to latest Mono: https://www.mono-project.com/download/stable/.
info: OmniSharp.MSBuild.Discovery.MSBuildLocator
Located 1 MSBuild instance(s)
1: StandAlone 16.4 - "/home/[user]/.vscode/extensions/ms-dotnettools.csharp-1.21.18/.omnisharp/1.35.1/omnisharp/.msbuild/Current/Bin"
info: OmniSharp.MSBuild.Discovery.MSBuildLocator
MSBUILD_EXE_PATH environment variable set to '/home/[user]/.vscode/extensions/ms-dotnettools.csharp-1.21.18/.omnisharp/1.35.1/omnisharp/.msbuild/Current/Bin/MSBuild.dll'
info: OmniSharp.MSBuild.Discovery.MSBuildLocator
Registered MSBuild instance: StandAlone 16.4 - "/home/[user]/.vscode/extensions/ms-dotnettools.csharp-1.21.18/.omnisharp/1.35.1/omnisharp/.msbuild/Current/Bin"
CscToolExe = csc.exe
MSBuildToolsPath = /home/[user]/.vscode/extensions/ms-dotnettools.csharp-1.21.18/.omnisharp/1.35.1/omnisharp/.msbuild/Current/Bin
CscToolPath = /home/[user]/.vscode/extensions/ms-dotnettools.csharp-1.21.18/.omnisharp/1.35.1/omnisharp/.msbuild/Current/Bin/Roslyn
BypassFrameworkInstallChecks = true
MSBuildExtensionsPath = /home/[user]/.vscode/extensions/ms-dotnettools.csharp-1.21.18/.omnisharp/1.35.1/omnisharp/.msbuild
info: OmniSharp.Cake.CakeProjectSystem
Detecting Cake files in '/[path]/[to]/[project]/demo'.
info: OmniSharp.Cake.CakeProjectSystem
Could not find any Cake files
info: OmniSharp.MSBuild.ProjectSystem
No solution files found in '/[path]/[to]/[project]/demo'
info: OmniSharp.MSBuild.ProjectManager
Queue project update for '/[path]/[to]/[project]/demo/demo.csproj'
info: OmniSharp.Script.ScriptProjectSystem
Detecting CSX files in '/[path]/[to]/[project]/demo'.
info: OmniSharp.Script.ScriptProjectSystem
Could not find any CSX files
info: OmniSharp.WorkspaceInitializer
Invoking Workspace Options Provider: OmniSharp.Roslyn.CSharp.Services.CSharpFormattingWorkspaceOptionsProvider, Order: 0
info: OmniSharp.WorkspaceInitializer
Invoking Workspace Options Provider: OmniSharp.Roslyn.CSharp.Services.RenameWorkspaceOptionsProvider, Order: 100
info: OmniSharp.WorkspaceInitializer
Invoking Workspace Options Provider: OmniSharp.Roslyn.CSharp.Services.ImplementTypeWorkspaceOptionsProvider, Order: 110
info: OmniSharp.WorkspaceInitializer
Invoking Workspace Options Provider: OmniSharp.Roslyn.CSharp.Services.BlockStructureWorkspaceOptionsProvider, Order: 140
info: OmniSharp.MSBuild.ProjectManager
Loading project: /[path]/[to]/[project]/demo/demo.csproj
info: OmniSharp.WorkspaceInitializer
Configuration finished.
info: OmniSharp.Stdio.Host
Omnisharp server running using Stdio at location '/[path]/[to]/[project]/demo' on host 4176.
info: OmniSharp.MSBuild.ProjectManager
Successfully loaded project file '/[path]/[to]/[project]/demo/demo.csproj'.
info: OmniSharp.MSBuild.ProjectManager
Adding project '/[path]/[to]/[project]/demo/demo.csproj'
info: OmniSharp.MSBuild.ProjectManager
Update project: demo

C# log

(no output)

Environment information

VSCode version: 1.45.0
C# Extension: 1.21.18

Mono Information

OmniSharp using global mono :6.4.0

Dotnet Information

.NET Core SDK (reflecting any global.json): Version: 3.1.103 Commit: 6f74c4a1dd

Runtime Environment:
OS Name: arch
OS Version:
OS Platform: Linux
RID: arch-x64
Base Path: /usr/share/dotnet/sdk/3.1.103/

Host (useful for support):
Version: 3.1.3
Commit: ed88943d24

.NET Core SDKs installed:
3.1.103 [/usr/share/dotnet/sdk]

.NET Core runtimes installed:
Microsoft.AspNetCore.App 3.1.3 [/usr/share/dotnet/shared/Microsoft.AspNetCore.App]
Microsoft.NETCore.App 3.1.3 [/usr/share/dotnet/shared/Microsoft.NETCore.App]

To install additional .NET Core runtimes or SDKs:
https://aka.ms/dotnet-download

Visual Studio Code Extensions

Extension	Author	Version
asp-net-core-vs-code-extension-pack	temilaj	1.0.3
aspnet-helper	schneiderpat	0.6.4
cpptools	ms-vscode	0.27.1
csharp	ms-dotnettools	1.21.18
Csharp-ASPNETCore	rahulsahay	1.11.0
csharpextensions	jchannon	1.3.1
docomment	k--kato	0.1.9
dotnet-test-explorer	formulahendry	0.7.1
gc-excelviewer	GrapeCity	2.1.34
java	redhat	0.61.0
mssql	ms-mssql	1.9.0
python	ms-python	2020.4.76186
razor-plus	austincummings	0.1.4
remote-containers	ms-vscode-remote	0.117.0
vsc-community-material-theme	Equinusocio	1.4.1
vsc-material-theme	Equinusocio	32.6.0
vsc-material-theme-icons	equinusocio	1.1.4
vscode-docker	ms-azuretools	1.1.0
vscode-java-debug	vscjava	0.25.1
vscode-java-dependency	vscjava	0.10.0
vscode-java-pack	vscjava	0.9.0
vscode-java-test	vscjava	0.22.3
vscode-maven	vscjava	0.21.3
vscode-typescript-tslint-plugin	ms-vscode	1.2.3
vscodeintellicode	VisualStudioExptTeam	1.2.7
vsliveshare	ms-vsliveshare	1.0.2106

[bDarbonne]

I realize this is similar to issue #3773. There are differences:

• The breakpoints do not work
• There seems to be no error given

Also did try this: https://github.com/OmniSharp/omnisharp-vscode/wiki/Enabling-C%23-debugger-logging#full-method

Here's the output:
-> (C) {"command":"initialize","arguments":{"clientID":"vscode","clientName":"Visual Studio Code","adapterID":"coreclr","pathFormat":"path","linesStartAt1":true,"columnsStartAt1":true,"supportsVariableType":true,"supportsVariablePaging":true,"supportsRunInTerminalRequest":true,"locale":"en-us","supportsProgressReporting":true},"type":"request","seq":1}

<- (R) {"seq":1,"type":"response","request_seq":1,"success":true,"command":"initialize","message":"","body":{"supportsConfigurationDoneRequest":true,"supportsFunctionBreakpoints":false,"supportsConditionalBreakpoints":true,"supportsHitConditionalBreakpoints":true,"supportsEvaluateForHovers":true,"exceptionBreakpointFilters":[{"filter":"all","label":"All Exceptions","default":false},{"filter":"user-unhandled","label":"User-Unhandled Exceptions","default":true}],"supportsSetVariable":true,"supportsGotoTargetsRequest":true,"supportsModulesRequest":true,"additionalModuleColumns":[],"supportedChecksumAlgorithms":["MD5","SHA1","SHA256"],"supportsExceptionOptions":true,"supportsValueFormattingOptions":true,"supportsExceptionInfoRequest":true,"supportTerminateDebuggee":true,"supportsSetExpression":true,"supportsReadMemoryRequest":true,"supportsExceptionConditions":true,"supportsLoadSymbolsRequest":true,"supportsModuleSymbolSearchLog":true,"supportsDebuggerProperties":true,"supportsSetSymbolOptions":true}}

-> (C) {"command":"initialize","arguments":{"clientID":"vscode","clientName":"Visual Studio Code","adapterID":"coreclr","pathFormat":"path","linesStartAt1":true,"columnsStartAt1":true,"supportsVariableType":true,"supportsVariablePaging":true,"supportsRunInTerminalRequest":true,"locale":"en-us","supportsProgressReporting":true},"type":"request","seq":1}

<- (R) {"seq":4,"type":"response","request_seq":1,"success":true,"command":"initialize","message":"","body":{"supportsConfigurationDoneRequest":true,"supportsFunctionBreakpoints":false,"supportsConditionalBreakpoints":true,"supportsHitConditionalBreakpoints":true,"supportsEvaluateForHovers":true,"exceptionBreakpointFilters":[{"filter":"all","label":"All Exceptions","default":false},{"filter":"user-unhandled","label":"User-Unhandled Exceptions","default":true}],"supportsSetVariable":true,"supportsGotoTargetsRequest":true,"supportsModulesRequest":true,"additionalModuleColumns":[],"supportedChecksumAlgorithms":["MD5","SHA1","SHA256"],"supportsExceptionOptions":true,"supportsValueFormattingOptions":true,"supportsExceptionInfoRequest":true,"supportTerminateDebuggee":true,"supportsSetExpression":true,"supportsReadMemoryRequest":true,"supportsExceptionConditions":true,"supportsLoadSymbolsRequest":true,"supportsModuleSymbolSearchLog":true,"supportsDebuggerProperties":true,"supportsSetSymbolOptions":true}}

-> (C) {"command":"launch","arguments":{"name":".NET Core Launch (web)","type":"coreclr","request":"launch","preLaunchTask":"build","program":"/[path]/[to]/[project]/demo/bin/Debug/netcoreapp3.1/demo.dll","args":[],"cwd":"/[path]/[to]/[project]/demo","stopAtEntry":false,"serverReadyAction":{"action":"openExternally","pattern":"^\s*Now listening on:\s+(https?://\S+)"},"env":{"ASPNETCORE_ENVIRONMENT":"Development","ASPNETCORE_URLS":"https://localhost:5001;http://localhost:5000"},"sourceFileMap":{"/Views":"/[path]/[to]/[project]/demo/Views"},"logging":{"engineLogging":false},"debugServer":4711,"noDebug":true,"internalConsoleOptions":"openOnSessionStart","__sessionId":"178c63ed-f3f3-49df-b5ee-1f1f92221172"},"type":"request","seq":2}

-> (C) {"seq":7,"type":"request","command":"handshake","arguments":{"value":"1wnOLCxVzYltSow7yPp8gXLiSMgWFPQDZ83+w2PqBn0="}}

---

You may only use the Microsoft .NET Core Debugger (vsdbg) with
Visual Studio Code, Visual Studio or Visual Studio for Mac software
to help you develop and test your applications.

[bDarbonne]

The "noDebug":true kinda has me wondering.

[gregg-miskelly]

@bDarbonne Is that the end of your debug log? It is strangely truncated, maybe because vsdbg-ui crashed? You might get more info using the 'full method'.

[paulsebeikin]

Hi All, I have the same issue. Here is my debug log using the "full method" described here: [https://github.com/OmniSharp/omnisharp-vscode/wiki/Enabling-C%23-debugger-logging#full-method]. Is there any workaround for this?

Waiting for communication on port 4711...

accepted connection from client
-> (C) {"command":"initialize","arguments":{"clientID":"vscode","clientName":"Code - OSS","adapterID":"coreclr","pathFormat":"path","linesStartAt1":true,"columnsStartAt1":true,"supportsVariableType":true,"supportsVariablePaging":true,"supportsRunInTerminalRequest":true,"locale":"en-gb","supportsProgressReporting":true},"type":"request","seq":1}
<- (R) {"seq":0,"type":"response","request_seq":1,"success":true,"command":"initialize","message":"","body":{"supportsConfigurationDoneRequest":true,"supportsFunctionBreakpoints":false,"supportsConditionalBreakpoints":true,"supportsHitConditionalBreakpoints":true,"supportsEvaluateForHovers":true,"exceptionBreakpointFilters":[{"filter":"all","label":"All Exceptions","default":false},{"filter":"user-unhandled","label":"User-Unhandled Exceptions","default":true}],"supportsSetVariable":true,"supportsGotoTargetsRequest":true,"supportsModulesRequest":true,"additionalModuleColumns":[],"supportedChecksumAlgorithms":["MD5","SHA1","SHA256"],"supportsExceptionOptions":true,"supportsValueFormattingOptions":true,"supportsExceptionInfoRequest":true,"supportTerminateDebuggee":true,"supportsSetExpression":true,"supportsReadMemoryRequest":true,"supportsExceptionConditions":true,"supportsLoadSymbolsRequest":true,"supportsModuleSymbolSearchLog":true,"supportsDebuggerProperties":true,"supportsSetSymbolOptions":true}}
-> (C) {"command":"initialize","arguments":{"clientID":"vscode","clientName":"Code - OSS","adapterID":"coreclr","pathFormat":"path","linesStartAt1":true,"columnsStartAt1":true,"supportsVariableType":true,"supportsVariablePaging":true,"supportsRunInTerminalRequest":true,"locale":"en-gb","supportsProgressReporting":true},"type":"request","seq":1}
-> (C) {"command":"launch","arguments":{"name":".NET Core Launch (console)","type":"coreclr","request":"launch","preLaunchTask":"build","program":"/home/pauls/Dev/sandbox/c#/ConsoleApp/bin/Debug/netcoreapp3.1/ConsoleApp.dll","args":[],"cwd":"/home/pauls/Dev/sandbox/c#/ConsoleApp","logging":{"engineLogging":false},"console":"internalConsole","stopAtEntry":false,"debugServer":4711,"internalConsoleOptions":"openOnSessionStart","__sessionId":"eaa62012-7144-40b7-9bb0-bf86654dfc1c"},"type":"request","seq":2}
<- (E) {"seq":3,"type":"event","event":"output","body":{"category":"console","output":"-------------------------------------------------------------------\nYou may only use the Microsoft .NET Core Debugger (vsdbg) with\nVisual Studio Code, Visual Studio or Visual Studio for Mac software\nto help you develop and test your applications.\n-------------------------------------------------------------------\n"}}
<- (R) {"seq":4,"type":"response","request_seq":2,"success":true,"command":"launch"}
<- (E) {"seq":5,"type":"event","event":"output","body":{"category":"telemetry","output":"VS/Diagnostics/Debugger/vsdbg/CommandFailed","data":{"VS.Diagnostics.Debugger.vsdbg.AdapterId":"coreclr","VS.Diagnostics.Debugger.vsdbg.ErrorCode":-1989017584,"VS.Diagnostics.Debugger.vsdbg.Distribution.Name":"d241e93b","VS.Diagnostics.Debugger.vsdbg.Command":"handshake","VS.Diagnostics.Debugger.vsdbg.OSFamily":"Linux","VS.Diagnostics.Debugger.vsdbg.Version":"16.6.20415.1 commit:0184bb70e1ed40656c0dfa53125805036207007b"}}}
<- (R) {"seq":6,"type":"response","request_seq":1,"success":false,"command":"handshake","message":"Error processing 'handshake' request. Unknown Error: 0x89720010"}

[gregg-miskelly]

@paulsebeikin: your issue is actually different. Your problem is that you installed the OSS version of Visual Studio Code, but the debugger is only licensed to work in official Microsoft products. Unfortunately due to both a bug in the debugger, and a bug in VS Code, that error message doesn't come up. You can fix the issue by installing the official version of VS Code from Microsoft. More info: https://github.com/OmniSharp/omnisharp-vscode/wiki/Microsoft-.NET-Core-Debugger-licensing-and-Microsoft-Visual-Studio-Code

[bDarbonne]

@gregg-miskelly Yes. That's the end of the debug log. The output was actually from ./vsdbg-ui --server --engineLogging.

Here is the output from ./vsdbg-ui --server --consoleLogging:

Waiting for communication on port 4711...

accepted connection from client
-> (C) {"command":"initialize","arguments":{"clientID":"vscode","clientName":"Visual Studio Code","adapterID":"coreclr","pathFormat":"path","linesStartAt1":true,"columnsStartAt1":true,"supportsVariableType":true,"supportsVariablePaging":true,"supportsRunInTerminalRequest":true,"locale":"en-us","supportsProgressReporting":true},"type":"request","seq":1}
<- (R) {"seq":0,"type":"response","request_seq":1,"success":true,"command":"initialize","message":"","body":{"supportsConfigurationDoneRequest":true,"supportsFunctionBreakpoints":false,"supportsConditionalBreakpoints":true,"supportsHitConditionalBreakpoints":true,"supportsEvaluateForHovers":true,"exceptionBreakpointFilters":[{"filter":"all","label":"All Exceptions","default":false},{"filter":"user-unhandled","label":"User-Unhandled Exceptions","default":true}],"supportsSetVariable":true,"supportsGotoTargetsRequest":true,"supportsModulesRequest":true,"additionalModuleColumns":[],"supportedChecksumAlgorithms":["MD5","SHA1","SHA256"],"supportsExceptionOptions":true,"supportsValueFormattingOptions":true,"supportsExceptionInfoRequest":true,"supportTerminateDebuggee":true,"supportsSetExpression":true,"supportsReadMemoryRequest":true,"supportsExceptionConditions":true,"supportsLoadSymbolsRequest":true,"supportsModuleSymbolSearchLog":true,"supportsDebuggerProperties":true,"supportsSetSymbolOptions":true}}
-> (C) {"command":"initialize","arguments":{"clientID":"vscode","clientName":"Visual Studio Code","adapterID":"coreclr","pathFormat":"path","linesStartAt1":true,"columnsStartAt1":true,"supportsVariableType":true,"supportsVariablePaging":true,"supportsRunInTerminalRequest":true,"locale":"en-us","supportsProgressReporting":true},"type":"request","seq":1}
-> (C) {"command":"launch","arguments":{"name":"launch - manual debugger","type":"coreclr","request":"launch","preLaunchTask":"build","program":"/[path]/[to]/[project]/demo/bin/Debug/netcoreapp3.1/demo.dll","args":[],"cwd":"/[path]/[to]/[project]/demo","stopAtEntry":false,"serverReadyAction":{"action":"openExternally","pattern":"^\s*Now listening on:\s+(https?://\S+)"},"env":{"ASPNETCORE_ENVIRONMENT":"Development","ASPNETCORE_URLS":"https://localhost:5001;http://localhost:5000"},"sourceFileMap":{"/Views":"/[path]/[to]/[project]/demo/Views"},"logging":{"engineLogging":false},"debugServer":4711,"noDebug":true,"internalConsoleOptions":"openOnSessionStart","__sessionId":"a0c1eaaa-122d-4ab3-890c-44887b05b377"},"type":"request","seq":2}
<- (E) {"seq":3,"type":"event","event":"output","body":{"category":"console","output":"-------------------------------------------------------------------\nYou may only use the Microsoft .NET Core Debugger (vsdbg) with\nVisual Studio Code, Visual Studio or Visual Studio for Mac software\nto help you develop and test your applications.\n-------------------------------------------------------------------\n"}}
<- (R) {"seq":4,"type":"response","request_seq":2,"success":true,"command":"launch"}
<- (E) {"seq":5,"type":"event","event":"initialized","body":{}}
-> (C) {"command":"setBreakpoints","arguments":{"source":{"name":"HomeController.cs","path":"/[path]/[to]/[project]/demo/Controllers/HomeController.cs","checksums":[{"algorithm":"SHA1","checksum":"499f334cbbd92ca9d80169f2b828b50f0ad45432"},{"algorithm":"SHA256","checksum":"2116510a12be6daa6c6d779aa1a699461464f26e63b78f8c1a39af300dcc0546"},{"algorithm":"SHA1","checksum":"e99e2cbf015da6e56326de2deebebbd8062d639a"},{"algorithm":"SHA256","checksum":"923c5ae532d651f687631e2b3c159e3e2a1be124f337721f45f8398b6520f296"}]},"lines":[17],"breakpoints":[{"line":17}],"sourceModified":false},"type":"request","seq":3}
<- (R) {"seq":6,"type":"response","request_seq":3,"success":true,"command":"setBreakpoints","message":"","body":{"breakpoints":[{"id":1,"verified":false,"message":"The breakpoint is pending and will be resolved when debugging starts.","line":17}]}}
-> (C) {"command":"setExceptionBreakpoints","arguments":{"filters":["user-unhandled"]},"type":"request","seq":4}
<- (R) {"seq":7,"type":"response","request_seq":4,"success":true,"command":"setExceptionBreakpoints"}
-> (C) {"command":"configurationDone","type":"request","seq":5}
<- (E) {"seq":8,"type":"event","event":"process","body":{"name":"/[path]/[to]/[project]/demo/bin/Debug/netcoreapp3.1/demo.dll","systemProcessId":4951,"isLocalProcess":true,"startMethod":null}}
<- (E) {"seq":9,"type":"event","event":"output","body":{"category":"telemetry","output":"VS/Diagnostics/Debugger/vsdbg/Launch","data":{"VS.Diagnostics.Debugger.vsdbg.AdapterId":"coreclr","VS.Diagnostics.Debugger.vsdbg.SourceFileMappings":1,"VS.Diagnostics.Debugger.vsdbg.VisualizerFileUsed":false,"VS.Diagnostics.Debugger.vsdbg.Launch.Duration":140,"VS.Diagnostics.Debugger.vsdbg.Distribution.Name":"arch","VS.Diagnostics.Debugger.vsdbg.TargetType":"Live","VS.Diagnostics.Debugger.vsdbg.OSFamily":"Linux","VS.Diagnostics.Debugger.vsdbg.Version":"16.6.20415.1 commit:0184bb70e1ed40656c0dfa53125805036207007b"}}}
<- (R) {"seq":10,"type":"response","request_seq":5,"success":true,"command":"configurationDone"}
-> (C) {"command":"threads","type":"request","seq":6}
<- (E) {"seq":11,"type":"event","event":"output","body":{"category":"telemetry","output":"VS/Diagnostics/Debugger/vsdbg/CommandFailed","data":{"VS.Diagnostics.Debugger.vsdbg.AdapterId":"coreclr","VS.Diagnostics.Debugger.vsdbg.ErrorCode":-2147019873,"VS.Diagnostics.Debugger.vsdbg.Distribution.Name":"arch","VS.Diagnostics.Debugger.vsdbg.Command":"threads","VS.Diagnostics.Debugger.vsdbg.OSFamily":"Linux","VS.Diagnostics.Debugger.vsdbg.Version":"16.6.20415.1 commit:0184bb70e1ed40656c0dfa53125805036207007b"}}}
<- (R) {"seq":12,"type":"response","request_seq":6,"success":false,"command":"threads","message":"Error processing 'threads' request. Unknown Error: 0x8007139f"}
<- (E) {"seq":13,"type":"event","event":"output","body":{"category":"stdout","output":"\u001B[40m\u001B[32minfo\u001B[39m\u001B[22m\u001B[49m: Microsoft.Hosting.Lifetime[0]\n"}}
<- (E) {"seq":14,"type":"event","event":"output","body":{"category":"stdout","output":" Now listening on: https://localhost:5001\n"}}
<- (E) {"seq":15,"type":"event","event":"output","body":{"category":"stdout","output":"\u001B[40m\u001B[32minfo\u001B[39m\u001B[22m\u001B[49m: Microsoft.Hosting.Lifetime[0]\n"}}
<- (E) {"seq":16,"type":"event","event":"output","body":{"category":"stdout","output":" Now listening on: http://localhost:5000\n"}}
<- (E) {"seq":17,"type":"event","event":"output","body":{"category":"stdout","output":"\u001B[40m\u001B[32minfo\u001B[39m\u001B[22m\u001B[49m: Microsoft.Hosting.Lifetime[0]\n"}}
<- (E) {"seq":18,"type":"event","event":"output","body":{"category":"stdout","output":" Application started. Press Ctrl+C to shut down.\n"}}
<- (E) {"seq":19,"type":"event","event":"output","body":{"category":"stdout","output":"\u001B[40m\u001B[32minfo\u001B[39m\u001B[22m\u001B[49m: Microsoft.Hosting.Lifetime[0]\n"}}
<- (E) {"seq":20,"type":"event","event":"output","body":{"category":"stdout","output":" Hosting environment: Development\n"}}
<- (E) {"seq":21,"type":"event","event":"output","body":{"category":"stdout","output":"\u001B[40m\u001B[32minfo\u001B[39m\u001B[22m\u001B[49m: Microsoft.Hosting.Lifetime[0]\n"}}
<- (E) {"seq":22,"type":"event","event":"output","body":{"category":"stdout","output":" Content root path: /[path]/[to]/[project]/demo\n"}}

Is this what you were referring to as the 'full method'?

[gregg-miskelly]

Thanks. That makes way more sense. What I believe is going on is that inter process communications between the .NET Debugging services (which run in the debugger process) and the .NET Runtime (which runs in your app) is silently failing. So the result is that the debugger is never told that the .NET Runtime loaded, and nothing will work.

Unfortunately, since the failure is silent, there is nothing in the log to explain what is going on. One thing you could try -- try attaching to an already running process, and see if we get an error that way. You will probably need to check the logs as VS Code has a bug (that was just fixed in Insiders) where they weren't displaying errors from the configurationDone request.

[bDarbonne]

Ok. I ran the project and attached to the process to begin debugging. Nothing seemed to stand out. Here's what I have:
output.txt

[gregg-miskelly]

Interesting. So in case it isn't obvious what happened there: everything worked just fine when you attached.

This means either:

1. Somehow the debugger is debugging the wrong process in the 'launch' case.
   -or-
2. The IPC for raising the 'runtime loaded' event is broken, but all the other IPC is working fine.

To try and differentiate the two, if you look at a trace when you do the launch, you will see a process event like the following, which indicates the process the debugger is attached to:

{"seq":8,"type":"event","event":"process","body":{"name":"/[path]/[to]/[project]/demo/bin/Debug/netcoreapp3.1/demo.dll","systemProcessId":4951,"isLocalProcess":true,"startMethod":null}}

Does the process id reported from that event match the process where your code is loaded?

[bDarbonne]

The process id does match.