Add repeater and bridge for Zigbee

[DaTTcz]

Related area

Zigbee

Hardware specification

ESP32-C6

Is your feature request related to a problem?

I miss using ESP32-C6 as a repeater in Zigbee.
And much greater using ESP32-C6 as a bridge in Zigbee. For example between Zigbee and MQTT(via LAN module) or Zigbee and RS485 MySensors.

Describe the solution you'd like

As Integration in an existing system.

Describe alternatives you've considered

No response

Additional context

No response

I have checked existing list of Feature requests and the Contribution Guide

• I confirm I have checked existing list of Feature requests and Contribution Guide.

[Greginkansas]

Add these lines for a repeater

#ifndef ZIGBEE_MODE_ZCZR /////////////// Router here

esp_zb_cfg_t zigbeeConfig = ZIGBEE_DEFAULT_ROUTER_CONFIG(); //////////////// Router here

[P-R-O-C-H-Y]

Hi @DaTTcz,

to use the device as a router (repeater), all you need is to select this role in the call Zigbee.begin():

Roles defined in the ZigbeeCore.h:

// enum of Zigbee Roles
typedef enum {
  ZIGBEE_COORDINATOR = 0,
  ZIGBEE_ROUTER = 1,
  ZIGBEE_END_DEVICE = 2
} zigbee_role_t;

Zigbee.begin call in your sketch:
Zigbee.begin(ZIGBEE_ROUTER);

About the second part, the bridge (gateway) is a more complex stuff. For this I currently recommend to move using esp-zigbee-sdk directly. This is not currently on the roadmap, but it may be added in future.

[DaTTcz]

Hi @DaTTcz,

to use the device as a router (repeater), all you need is to select this role in the call Zigbee.begin():

Roles defined in the ZigbeeCore.h:

// enum of Zigbee Roles
typedef enum {
  ZIGBEE_COORDINATOR = 0,
  ZIGBEE_ROUTER = 1,
  ZIGBEE_END_DEVICE = 2
} zigbee_role_t;

Zigbee.begin call in your sketch: Zigbee.begin(ZIGBEE_ROUTER);

About the second part, the bridge (gateway) is a more complex stuff. For this I currently recommend to move using esp-zigbee-sdk directly. This is not currently on the roadmap, but it may be added in future.

Thank you.

[MikeBP13]

@P-R-O-C-H-Y : can you add a full example for a zigbee router? Thank you.

[P-R-O-C-H-Y]

Hi @MikeBP13, just use any example with is there and change Zigbee.begin function parameter to ZIGBEE_ROUTER as I explained in comment above:
Zigbee.begin(ZIGBEE_ROUTER);

[MikeBP13]

Is there a way to specify the allowed max. number of clients?

[MikeBP13]

I assume that there is no need to add any endpoint.
In this case, how can I specify the manufacturer and model? What about a callback for identify?

[P-R-O-C-H-Y]

If you don't add any endpoint you cannot specify manufacturer/model and no callback for identify.
If you need it that way, you can create your own Endpoint Class with just the basic and identify clusters.

To answer the question above about max. number of clients - do you mean children?

For that case you can use your custom config in Zigbee.begin() function:

  esp_zb_cfg_t zigbeeConfig = ZIGBEE_DEFAULT_ROUTER_CONFIG();
  zigbeeConfig.nwk_cfg.zczr_cfg.max_children = 10; // 10 is default, specify it here.

  // Pass the configuration to the Zigbee.begin
  Zigbee.begin(&zigbeeConfig, false));

[MikeBP13]

If you don't add any endpoint you cannot specify manufacturer/model and no callback for identify. If you need it that way, you can create your own Endpoint Class with just the basic and identify clusters.

To answer the question above about max. number of clients - do you mean children?

For that case you can use your custom config in Zigbee.begin() function:

esp_zb_cfg_t zigbeeConfig = ZIGBEE_DEFAULT_ROUTER_CONFIG();
zigbeeConfig.nwk_cfg.zczr_cfg.max_children = 10; // 10 is default, specify it here.

// Pass the configuration to the Zigbee.begin
Zigbee.begin(&zigbeeConfig, false));

Thanks for the hints.
Unfortunately, I don't have the knowledge at this point to define such a class. I'm really a beginner in Zigbee stuff... any chance you can give some pointers?

[P-R-O-C-H-Y]

@MikeBP13 I have quickly created this code for the class + the sketch. Give it a try.
I did not compiled that so there might be some errors/warnings, please keep that in mind, was writing it in the GIST.

https://gist.github.com/P-R-O-C-H-Y/153c88cd7159c934c030ceccf7d4b379

Let me know if its fine or you have any issues :)
I can add this class to the Zigbee library also if that worked for you.

[MikeBP13]

@MikeBP13 I have quickly created this code for the class + the sketch. Give it a try. I did not compiled that so there might be some errors/warnings, please keep that in mind, was writing it in the GIST.

https://gist.github.com/P-R-O-C-H-Y/153c88cd7159c934c030ceccf7d4b379

Let me know if its fine or you have any issues :) I can add this class to the Zigbee library also if that worked for you.

Many thanks for your prompt response and help.

The header file is missing an endif at the end and the ino file is missing an include for the new class (which will not be needed when you publish the new endpoint).

Other than that, it compiles fine and the device is recognized in HA as a router. I will leave the test device powered over night to see if it acts as a router.

Great work!

[P-R-O-C-H-Y]

@MikeBP13 I am glad it worked, It was done like in 5 minutes :D

Let me know if everything worked out so I will add this EP to the Zigbee Library :)