WiFiClientSecure make issue

[Hamid-Najafi]

Hardware: (Doesn't matter for this issue !)

Board: node32
Core Installation/update date: latest
IDE name: IDF-with Arduino
Flash Frequency: 40
PSRAM enabled: ?no?
Upload Speed: ?115200?
Computer OS: MacOS

Description:

error in make command !
USING LATEST LIBRARIES without any change !!

CXX build/arduino-esp32/libraries/WiFiClientSecure/src//ssl_client.o /Users/hamid/Documents/Projects/ESP-IDF/IDF-Arduino/components/arduino-esp32/libraries/WiFiClientSecure/src/ssl_client.cpp: In function 'int start_ssl_client(sslclient_context*, const char*, uint32_t, const char*, const char*, const char*, const char*, const char*)': /Users/hamid/Documents/Projects/ESP-IDF/IDF-Arduino/components/arduino-esp32/libraries/WiFiClientSecure/src/ssl_client.cpp:144:67: error: 'mbedtls_ssl_conf_psk' was not declared in this scope (const unsigned char *)pskIdent, strlen(pskIdent)); ^ make[1]: *** [libraries/WiFiClientSecure/src//ssl_client.o] Error 1 make: *** [component-arduino-esp32-build] Error 2

[atanisoft]

you need to enable MBED_TLS_PSK options in your sdkconfig, please refer to the arduino sdkconfg for an example, there are four or five lines you need to enable.

[Hamid-Najafi]

ok dude, I'm surrender ! :)
I just get a new version (TODAY) and it fixed
I have a simple function to update my esp repos in bash profile. it may help :)

function esp_update() { currentDir=$PWD && \ cd ~/esp && \ cd arduino-esp32 && \ git pull origin master && \ git submodule update --init --recursive && \ cd .. && \ cd esp-idf && \ git pull origin master && \ pip install esptool --upgrade && \ cd $currentDir }

[henryjw]

For anyone else that runs into this issue, another solution is to disable the WifiClientSecure component altogether. This can be done by following the steps below:

1. Run make menuconfig from the project's directory
2. Select "Arduino Configuration"
3. Select "Include only specific Arduino libraries"
4. Deselect "Enable AzureIOT", "Enable HttpClient", and "Enable WifiClientSecure" and any other libraries you don't need
5. Exit and save your changes

[Hamid-Najafi]

Thanks henry
But the problem was that the WifiClientSecure was FORCE selected (i think it was gray, not white)

[henryjw]

@Goldenstarc Whoops. Forgot to mention that there are other libraries that are dependent on WifiClientSecure, so those have to be disabled first. So the order to disable them in is AzureIOT, HttpClient, WifiClientSecure.
I'll update my original comment to reflect this.

[sfowlr]

Should this issue be re-opened? Seems to me like the Kconfig file for Arduino should prevent you from using WiFiClientSecure if you don't have its dependencies enabled. I'll see if I can put together a PR to fix this.

[qt1]

Same issue after last update ..

[tevino]

Same issue on latest master

[hmic]

me too

[nevercast]

This seemed to work for me
make menuconfig

Component Config -> mbedTLS -> TLS Key Exchange Methods -> 
  [*] Enable pre-shared-key ciphersuits
    [*] Enable PSK based ciphersuite modes

Good luck.

[tevino]

@nevercast it works, thank you.

[Hamid-Najafi]

Should this issue be re-opened? Seems to me like the Kconfig file for Arduino should prevent you from using WiFiClientSecure if you don't have its dependencies enabled. I'll see if I can put together a PR to fix this.

you mean this part of Kconfig.projbuild?

config ARDUINO_SELECTIVE_WiFiClientSecure bool "Enable WiFiClientSecure" depends on ARDUINO_SELECTIVE_COMPILATION select ARDUINO_SELECTIVE_WiFi default y

[sfowlr]

Yes, a proper kconfig should really have all of an option's dependencies listed, either with require or select. So that option really should also select MBEDTLS_PSK_MODES as well as the configuration symbols required for the PSK modes that have been implemented. Otherwise this codebase is just going to keep getting broken every time people try to update without starting from scratch or totally replacing their sdkconfig.

…

On Sat, Jan 19, 2019, 3:59 AM Hamid ***@***.*** wrote: Should this issue be re-opened? Seems to me like the Kconfig file for Arduino should prevent you from using WiFiClientSecure if you don't have its dependencies enabled. I'll see if I can put together a PR to fix this. you mean this part of Kconfig.projbuild? config ARDUINO_SELECTIVE_WiFiClientSecure bool "Enable WiFiClientSecure" depends on ARDUINO_SELECTIVE_COMPILATION select ARDUINO_SELECTIVE_WiFi default y — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#2154 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ASf84qtMXKnVfI-32VBTdk0qmW6DuKC1ks5vEuyGgaJpZM4ZCMUZ> .