PulseIn doesn't compile for ESP32 C3 Mini

[weoiss1998]

Hardware:

Board: ESP32 C3 Dev Module
Core Installation version: 2.0.0-rc1
IDE name: Arduino IDE
Flash Frequency: 40Mhz
Upload Speed: 115200
Computer OS: Windows 10

Description:

I cannot compile my code because of the pulseIn function.

Sketch: (leave the backquotes for code formatting)

//Change the code below by your sketch

int highTime;    //integer for storing high time
int lowTime;     //integer for storing low time
float period;    // integer for storing period
float freq;      //storing frequency

void setup()
{
  Serial.begin(115200);
    pinMode(19,INPUT);  //Setting pin as input
}

void loop()
{
    highTime=pulseIn(19,HIGH);  //read high time
    lowTime=pulseIn(19,LOW); 
    period = highTime+lowTime; // Period = Ton + Toff
    freq=1000000/period;       //getting frequency with totalTime is in Micro seconds
    if(freq>3000&&freq<25000){
    Serial.println(freq);
    }
    delay(100);
}

### Debug Messages:
Arduino: 1.8.15 (Windows Store 1.8.49.0) (Windows 10), Board: "ESP32C3 Dev Module, Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS), 160MHz (WiFi), QIO, 40MHz, 4MB (32Mb), 115200, Error"

c:/users/simon/documents/arduinodata/packages/esp32/tools/riscv32-esp-elf-gcc/gcc8_4_0-esp-2021r1/bin/../lib/gcc/riscv32-esp-elf/8.4.0/../../../../riscv32-esp-elf/bin/ld.exe: C:\Users\simon\AppData\Local\Temp\arduino_cache_757352\core\core_2d9922f28ca7005c97674f5917340663.a(wiring_pulse.c.o): in function `pulseIn':

C:\Users\simon\Documents\ArduinoData\packages\esp32\hardware\esp32\2.0.0-rc1\cores\esp32/wiring_pulse.c:38: undefined reference to `xthal_get_ccount'

c:/users/simon/documents/arduinodata/packages/esp32/tools/riscv32-esp-elf-gcc/gcc8_4_0-esp-2021r1/bin/../lib/gcc/riscv32-esp-elf/8.4.0/../../../../riscv32-esp-elf/bin/ld.exe: C:\Users\simon\Documents\ArduinoData\packages\esp32\hardware\esp32\2.0.0-rc1\cores\esp32/wiring_pulse.c:40: undefined reference to `xthal_get_ccount'

c:/users/simon/documents/arduinodata/packages/esp32/tools/riscv32-esp-elf-gcc/gcc8_4_0-esp-2021r1/bin/../lib/gcc/riscv32-esp-elf/8.4.0/../../../../riscv32-esp-elf/bin/ld.exe: C:\Users\simon\Documents\ArduinoData\packages\esp32\hardware\esp32\2.0.0-rc1\cores\esp32/wiring_pulse.c:45: undefined reference to `xthal_get_ccount'

c:/users/simon/documents/arduinodata/packages/esp32/tools/riscv32-esp-elf-gcc/gcc8_4_0-esp-2021r1/bin/../lib/gcc/riscv32-esp-elf/8.4.0/../../../../riscv32-esp-elf/bin/ld.exe: C:\Users\simon\Documents\ArduinoData\packages\esp32\hardware\esp32\2.0.0-rc1\cores\esp32/wiring_pulse.c:41: undefined reference to `xthal_get_ccount'

c:/users/simon/documents/arduinodata/packages/esp32/tools/riscv32-esp-elf-gcc/gcc8_4_0-esp-2021r1/bin/../lib/gcc/riscv32-esp-elf/8.4.0/../../../../riscv32-esp-elf/bin/ld.exe: C:\Users\simon\Documents\ArduinoData\packages\esp32\hardware\esp32\2.0.0-rc1\cores\esp32/wiring_pulse.c:42: undefined reference to `xthal_get_ccount'

c:/users/simon/documents/arduinodata/packages/esp32/tools/riscv32-esp-elf-gcc/gcc8_4_0-esp-2021r1/bin/../lib/gcc/riscv32-esp-elf/8.4.0/../../../../riscv32-esp-elf/bin/ld.exe: C:\Users\simon\AppData\Local\Temp\arduino_cache_757352\core\core_2d9922f28ca7005c97674f5917340663.a(wiring_pulse.c.o):C:\Users\simon\Documents\ArduinoData\packages\esp32\hardware\esp32\2.0.0-rc1\cores\esp32/wiring_pulse.c:43: more undefined references to `xthal_get_ccount' follow

collect2.exe: error: ld returned 1 exit status

exit status 1

Fehler beim Kompilieren für das Board ESP32C3 Dev Module.