ESP32-S3 DevKit 8MB partition scheme mislabeled

[cmsavage]

Board

ESP32-S3-DevKitC

Device Description

N/A

Hardware Configuration

N/A

Version

v2.0.4

IDE Name

Arduino IDE

Operating System

Windows 10

Flash frequency

N/A

PSRAM enabled

yes

Upload speed

N/A

Description

For the ESP32-S3 Dev Module, the 8MB partition scheme is listed as "8M Flash (3MB APP/1.5MB FAT)", but the corresponding default_8MB.csv file shows SPIFFS is used, not FAT. For consistency with other partition schemes, the relevant boards.txt line should be something like:
esp32s3.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB SPIFFS)

There is also a lack of consistency between the various partition scheme labels: ffat/FAT/FATFS, spiffs/SPIFFS, two entries labeled as default, etc.

Sketch

N/A

Debug Message

N/A

Other Steps to Reproduce

No response

I have checked existing issues, online documentation and the Troubleshooting Guide

• I confirm I have checked existing issues, online documentation and Troubleshooting guide.

[SuGlider]

Yes, you are right, thanks for reporting!
It deserves a full review of all the schemes, names and files.