[LoopVectorize] Enable more early exit vectorisation tests

llvm/include/llvm/Transforms/Vectorize/LoopVectorize.h

@@ -170,6 +170,15 @@ void reportVectorizationFailure(const StringRef DebugMsg,
     const StringRef OREMsg, const StringRef ORETag,
     OptimizationRemarkEmitter *ORE, Loop *TheLoop, Instruction *I = nullptr);
 
+/// Same as above, but the debug message and optimization remark are identical
+inline void reportVectorizationFailure(const StringRef DebugMsg,
+                                       const StringRef ORETag,
+                                       OptimizationRemarkEmitter *ORE,
+                                       Loop *TheLoop,
+                                       Instruction *I = nullptr) {
+  reportVectorizationFailure(DebugMsg, DebugMsg, ORETag, ORE, TheLoop, I);
+}
+
 /// A marker analysis to determine if extra passes should be run after loop
 /// vectorization.
 struct ShouldRunExtraVectorPasses

llvm/lib/Transforms/Vectorize/LoopVectorize.cpp

@@ -3016,6 +3016,22 @@ void InnerLoopVectorizer::fixVectorizedLoop(VPTransformState &State) {
   PSE.getSE()->forgetLoop(OrigLoop);
   PSE.getSE()->forgetBlockAndLoopDispositions();
 
+  // When dealing with uncountable early exits we create middle.split blocks
+  // between the vector loop region and the exit block. These blocks need
+  // adding to any outer loop.
+  VPRegionBlock *VectorRegion = State.Plan->getVectorLoopRegion();
+  Loop *OuterLoop = OrigLoop->getParentLoop();
+  if (Legal->hasUncountableEarlyExit() && OuterLoop) {
+    VPBasicBlock *MiddleVPBB = State.Plan->getMiddleBlock();
+    VPBlockBase *PredVPBB = MiddleVPBB->getSinglePredecessor();
+    while (PredVPBB && PredVPBB != VectorRegion) {
+      BasicBlock *MiddleSplitBB =
+          State.CFG.VPBB2IRBB[cast<VPBasicBlock>(PredVPBB)];
+      OuterLoop->addBasicBlockToLoop(MiddleSplitBB, *LI);
+      PredVPBB = PredVPBB->getSinglePredecessor();
+    }
+  }
+
   // After vectorization, the exit blocks of the original loop will have
   // additional predecessors. Invalidate SCEVs for the exit phis in case SE
   // looked through single-entry phis.
@@ -3046,7 +3062,6 @@ void InnerLoopVectorizer::fixVectorizedLoop(VPTransformState &State) {
   for (Instruction *PI : PredicatedInstructions)
     sinkScalarOperands(&*PI);
 
-  VPRegionBlock *VectorRegion = State.Plan->getVectorLoopRegion();
   VPBasicBlock *HeaderVPBB = VectorRegion->getEntryBasicBlock();
   BasicBlock *HeaderBB = State.CFG.VPBB2IRBB[HeaderVPBB];
 
@@ -4753,6 +4768,7 @@ bool LoopVectorizationPlanner::isCandidateForEpilogueVectorization(
   // Epilogue vectorization code has not been auditted to ensure it handles
   // non-latch exits properly.  It may be fine, but it needs auditted and
   // tested.
+  // TODO: Add support for loops with an early exit.
   if (OrigLoop->getExitingBlock() != OrigLoop->getLoopLatch())
     return false;
 
@@ -5001,6 +5017,12 @@ LoopVectorizationCostModel::selectInterleaveCount(ElementCount VF,
   if (!Legal->isSafeForAnyVectorWidth())
     return 1;
 
+  // We don't attempt to perform interleaving for loops with uncountable early
+  // exits because the VPInstruction::AnyOf code cannot currently handle
+  // multiple parts.
+  if (Legal->hasUncountableEarlyExit())
+    return 1;
+
   auto BestKnownTC = getSmallBestKnownTC(PSE, TheLoop);
   const bool HasReductions = !Legal->getReductionVars().empty();
 
@@ -7813,6 +7835,8 @@ DenseMap<const SCEV *, Value *> LoopVectorizationPlanner::executePlan(
   // 2.5 When vectorizing the epilogue, fix reduction and induction resume
   // values from the additional bypass block.
   if (VectorizingEpilogue) {
+    assert(!ILV.Legal->hasUncountableEarlyExit() &&
+           "Epilogue vectorisation not yet supported with early exits");
     BasicBlock *BypassBlock = ILV.getAdditionalBypassBlock();
     for (VPRecipeBase &R : *ExitVPBB) {
       fixReductionScalarResumeWhenVectorizingEpilog(
@@ -10177,13 +10201,36 @@ bool LoopVectorizePass::processLoop(Loop *L) {
     return false;
   }
 
-  if (LVL.hasUncountableEarlyExit() && !EnableEarlyExitVectorization) {
-    reportVectorizationFailure("Auto-vectorization of loops with uncountable "
-                               "early exit is not enabled",
-                               "Auto-vectorization of loops with uncountable "
-                               "early exit is not enabled",
-                               "UncountableEarlyExitLoopsDisabled", ORE, L);
-    return false;
+  if (LVL.hasUncountableEarlyExit()) {
+    if (!EnableEarlyExitVectorization) {
+      reportVectorizationFailure("Auto-vectorization of loops with uncountable "
+                                 "early exit is not enabled",
+                                 "UncountableEarlyExitLoopsDisabled", ORE, L);
+      return false;
+    }
+
+    // In addUsersInExitBlocks we already bail out if there is an outside use
+    // of a loop-defined variable, but it ignores induction variables which are
+    // handled by InnerLoopVectorizer::fixupIVUsers. We need to bail out if we
+    // encounter induction variables too otherwise fixupIVUsers will crash.
+    BasicBlock *LoopLatch = L->getLoopLatch();
+    for (const auto &Induction : LVL.getInductionVars()) {
+      PHINode *Ind = Induction.first;
+      Instruction *IndUpdate =
+          cast<Instruction>(Ind->getIncomingValueForBlock(LoopLatch));
+      for (Instruction *I : {cast<Instruction>(Ind), IndUpdate}) {
+        for (User *U : I->users()) {
+          Instruction *UI = cast<Instruction>(U);
+          if (!L->contains(UI)) {
+            reportVectorizationFailure(
+                "Auto-vectorization of loops with uncountable early exits and "
+                "outside uses of induction variables unsupported",
+                "UncountableEarlyExitLoopIndLiveOutsUnsupported", ORE, L);
+            return false;
+          }
+        }
+      }
+    }
   }
 
   // Entrance to the VPlan-native vectorization path. Outer loops are processed
@@ -10208,6 +10255,18 @@ bool LoopVectorizePass::processLoop(Loop *L) {
   if (UseInterleaved)
     IAI.analyzeInterleaving(useMaskedInterleavedAccesses(*TTI));
 
+  if (LVL.hasUncountableEarlyExit()) {
+    BasicBlock *LoopLatch = L->getLoopLatch();
+    if (IAI.requiresScalarEpilogue() ||
+        any_of(LVL.getCountableExitingBlocks(),
+               [LoopLatch](BasicBlock *BB) { return BB != LoopLatch; })) {
+      reportVectorizationFailure("Auto-vectorization of early exit loops "
+                                 "requiring a scalar epilogue is unsupported",
+                                 "UncountableEarlyExitUnsupported", ORE, L);
+      return false;
+    }
+  }
+
   // Check the function attributes and profiles to find out if this function
   // should be optimized for size.
   ScalarEpilogueLowering SEL =

llvm/test/Transforms/LoopVectorize/AArch64/simple_early_exit.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 4
-; RUN: opt -S < %s -p loop-vectorize | FileCheck %s --check-prefixes=CHECK
+; RUN: opt -S < %s -p loop-vectorize -enable-early-exit-vectorization | FileCheck %s --check-prefixes=CHECK
 
 target triple = "aarch64-unknown-linux-gnu"
 
@@ -272,22 +272,66 @@ define i32 @diff_exit_block_needs_scev_check(i32 %end) {
 ; CHECK-NEXT:    call void @init_mem(ptr [[P1]], i64 1024)
 ; CHECK-NEXT:    call void @init_mem(ptr [[P2]], i64 1024)
 ; CHECK-NEXT:    [[END_CLAMPED:%.*]] = and i32 [[END]], 1023
+; CHECK-NEXT:    [[TMP19:%.*]] = trunc i32 [[END]] to i10
+; CHECK-NEXT:    [[TMP20:%.*]] = zext i10 [[TMP19]] to i64
+; CHECK-NEXT:    [[UMAX1:%.*]] = call i64 @llvm.umax.i64(i64 [[TMP20]], i64 1)
+; CHECK-NEXT:    [[MIN_ITERS_CHECK:%.*]] = icmp ult i64 [[UMAX1]], 12
+; CHECK-NEXT:    br i1 [[MIN_ITERS_CHECK]], label [[SCALAR_PH:%.*]], label [[VECTOR_SCEVCHECK:%.*]]
+; CHECK:       vector.scevcheck:
+; CHECK-NEXT:    [[UMAX:%.*]] = call i32 @llvm.umax.i32(i32 [[END_CLAMPED]], i32 1)
+; CHECK-NEXT:    [[TMP2:%.*]] = add nsw i32 [[UMAX]], -1
+; CHECK-NEXT:    [[TMP3:%.*]] = trunc i32 [[TMP2]] to i8
+; CHECK-NEXT:    [[TMP4:%.*]] = add i8 1, [[TMP3]]
+; CHECK-NEXT:    [[TMP5:%.*]] = icmp ult i8 [[TMP4]], 1
+; CHECK-NEXT:    [[TMP6:%.*]] = icmp ugt i32 [[TMP2]], 255
+; CHECK-NEXT:    [[TMP7:%.*]] = or i1 [[TMP5]], [[TMP6]]
+; CHECK-NEXT:    br i1 [[TMP7]], label [[SCALAR_PH]], label [[VECTOR_PH:%.*]]
+; CHECK:       vector.ph:
+; CHECK-NEXT:    [[N_MOD_VF:%.*]] = urem i64 [[UMAX1]], 4
+; CHECK-NEXT:    [[N_VEC:%.*]] = sub i64 [[UMAX1]], [[N_MOD_VF]]
+; CHECK-NEXT:    [[IND_END:%.*]] = trunc i64 [[N_VEC]] to i8
 ; CHECK-NEXT:    br label [[FOR_BODY1:%.*]]
+; CHECK:       vector.body:
+; CHECK-NEXT:    [[INDEX:%.*]] = phi i64 [ 0, [[VECTOR_PH]] ], [ [[INDEX_NEXT:%.*]], [[FOR_BODY1]] ]
+; CHECK-NEXT:    [[TMP8:%.*]] = add i64 [[INDEX]], 0
+; CHECK-NEXT:    [[TMP9:%.*]] = getelementptr inbounds i32, ptr [[P1]], i64 [[TMP8]]
+; CHECK-NEXT:    [[TMP10:%.*]] = getelementptr inbounds i32, ptr [[TMP9]], i32 0
+; CHECK-NEXT:    [[WIDE_LOAD:%.*]] = load <4 x i32>, ptr [[TMP10]], align 4
+; CHECK-NEXT:    [[TMP11:%.*]] = getelementptr inbounds i32, ptr [[P2]], i64 [[TMP8]]
+; CHECK-NEXT:    [[TMP12:%.*]] = getelementptr inbounds i32, ptr [[TMP11]], i32 0
+; CHECK-NEXT:    [[WIDE_LOAD3:%.*]] = load <4 x i32>, ptr [[TMP12]], align 4
+; CHECK-NEXT:    [[TMP13:%.*]] = icmp eq <4 x i32> [[WIDE_LOAD]], [[WIDE_LOAD3]]
+; CHECK-NEXT:    [[TMP14:%.*]] = xor <4 x i1> [[TMP13]], splat (i1 true)
+; CHECK-NEXT:    [[INDEX_NEXT]] = add nuw i64 [[INDEX]], 4
+; CHECK-NEXT:    [[TMP15:%.*]] = xor <4 x i1> [[TMP14]], splat (i1 true)
+; CHECK-NEXT:    [[TMP16:%.*]] = call i1 @llvm.vector.reduce.or.v4i1(<4 x i1> [[TMP15]])
+; CHECK-NEXT:    [[TMP17:%.*]] = icmp eq i64 [[INDEX_NEXT]], [[N_VEC]]
+; CHECK-NEXT:    [[TMP18:%.*]] = or i1 [[TMP16]], [[TMP17]]
+; CHECK-NEXT:    br i1 [[TMP18]], label [[MIDDLE_SPLIT:%.*]], label [[FOR_BODY1]], !llvm.loop [[LOOP0:![0-9]+]]
+; CHECK:       middle.split:
+; CHECK-NEXT:    br i1 [[TMP16]], label [[FOUND:%.*]], label [[MIDDLE_BLOCK:%.*]]
+; CHECK:       middle.block:
+; CHECK-NEXT:    [[CMP_N:%.*]] = icmp eq i64 [[UMAX1]], [[N_VEC]]
+; CHECK-NEXT:    br i1 [[CMP_N]], label [[EXIT:%.*]], label [[SCALAR_PH]]
+; CHECK:       scalar.ph:
+; CHECK-NEXT:    [[BC_RESUME_VAL:%.*]] = phi i8 [ [[IND_END]], [[MIDDLE_BLOCK]] ], [ 0, [[ENTRY:%.*]] ], [ 0, [[VECTOR_SCEVCHECK]] ]
+; CHECK-NEXT:    [[BC_RESUME_VAL2:%.*]] = phi i64 [ [[N_VEC]], [[MIDDLE_BLOCK]] ], [ 0, [[ENTRY]] ], [ 0, [[VECTOR_SCEVCHECK]] ]
+; CHECK-NEXT:    br label [[FOR_BODY:%.*]]
 ; CHECK:       for.body:
-; CHECK-NEXT:    [[IND:%.*]] = phi i8 [ [[IND_NEXT:%.*]], [[FOR_INC:%.*]] ], [ 0, [[ENTRY:%.*]] ]
-; CHECK-NEXT:    [[GEP_IND:%.*]] = phi i64 [ [[GEP_IND_NEXT:%.*]], [[FOR_INC]] ], [ 0, [[ENTRY]] ]
+; CHECK-NEXT:    [[IND:%.*]] = phi i8 [ [[IND_NEXT:%.*]], [[FOR_INC:%.*]] ], [ [[BC_RESUME_VAL]], [[SCALAR_PH]] ]
+; CHECK-NEXT:    [[GEP_IND:%.*]] = phi i64 [ [[GEP_IND_NEXT:%.*]], [[FOR_INC]] ], [ [[BC_RESUME_VAL2]], [[SCALAR_PH]] ]
 ; CHECK-NEXT:    [[ARRAYIDX1:%.*]] = getelementptr inbounds i32, ptr [[P1]], i64 [[GEP_IND]]
 ; CHECK-NEXT:    [[TMP0:%.*]] = load i32, ptr [[ARRAYIDX1]], align 4
 ; CHECK-NEXT:    [[ARRAYIDX2:%.*]] = getelementptr inbounds i32, ptr [[P2]], i64 [[GEP_IND]]
 ; CHECK-NEXT:    [[TMP1:%.*]] = load i32, ptr [[ARRAYIDX2]], align 4
 ; CHECK-NEXT:    [[CMP_EARLY:%.*]] = icmp eq i32 [[TMP0]], [[TMP1]]
-; CHECK-NEXT:    br i1 [[CMP_EARLY]], label [[FOUND:%.*]], label [[FOR_INC]]
+; CHECK-NEXT:    br i1 [[CMP_EARLY]], label [[FOUND]], label [[FOR_INC]]
 ; CHECK:       for.inc:
 ; CHECK-NEXT:    [[IND_NEXT]] = add i8 [[IND]], 1
 ; CHECK-NEXT:    [[CONV:%.*]] = zext i8 [[IND_NEXT]] to i32
 ; CHECK-NEXT:    [[GEP_IND_NEXT]] = add i64 [[GEP_IND]], 1
 ; CHECK-NEXT:    [[CMP:%.*]] = icmp ult i32 [[CONV]], [[END_CLAMPED]]
-; CHECK-NEXT:    br i1 [[CMP]], label [[FOR_BODY1]], label [[EXIT:%.*]]
+; CHECK-NEXT:    br i1 [[CMP]], label [[FOR_BODY]], label [[EXIT]], !llvm.loop [[LOOP3:![0-9]+]]
 ; CHECK:       found:
 ; CHECK-NEXT:    ret i32 1
 ; CHECK:       exit:
@@ -325,9 +369,58 @@ exit:
   ret i32 0
 }
 
+%my.struct = type { i8, i8 }
+
+define i64 @same_exit_block_requires_interleaving() {
+; CHECK-LABEL: define i64 @same_exit_block_requires_interleaving() {
+; CHECK-NEXT:  entry:
+; CHECK-NEXT:    [[P1:%.*]] = alloca [128 x %my.struct], align 8
+; CHECK-NEXT:    call void @init_mem(ptr [[P1]], i64 256)
+; CHECK-NEXT:    br label [[LOOP:%.*]]
+; CHECK:       loop:
+; CHECK-NEXT:    [[INDEX:%.*]] = phi i64 [ [[INDEX_NEXT:%.*]], [[LOOP_LATCH:%.*]] ], [ 3, [[ENTRY:%.*]] ]
+; CHECK-NEXT:    [[ARRAYIDX:%.*]] = getelementptr inbounds [128 x %my.struct], ptr [[P1]], i64 0, i64 [[INDEX]]
+; CHECK-NEXT:    [[LD1:%.*]] = load i8, ptr [[ARRAYIDX]], align 1
+; CHECK-NEXT:    [[CMP3:%.*]] = icmp eq i8 [[LD1]], 3
+; CHECK-NEXT:    br i1 [[CMP3]], label [[LOOP_LATCH]], label [[LOOP_END:%.*]]
+; CHECK:       loop.latch:
+; CHECK-NEXT:    [[INDEX_NEXT]] = add i64 [[INDEX]], 1
+; CHECK-NEXT:    [[EXITCOND:%.*]] = icmp ne i64 [[INDEX_NEXT]], 69
+; CHECK-NEXT:    br i1 [[EXITCOND]], label [[LOOP]], label [[LOOP_END]]
+; CHECK:       loop.end:
+; CHECK-NEXT:    [[RETVAL:%.*]] = phi i64 [ 0, [[LOOP_LATCH]] ], [ 1, [[LOOP]] ]
+; CHECK-NEXT:    ret i64 [[RETVAL]]
+;
+entry:
+  %p1 = alloca [128 x %my.struct]
+  call void @init_mem(ptr %p1, i64 256)
+  br label %loop
+
+loop:
+  %index = phi i64 [ %index.next, %loop.latch ], [ 3, %entry ]
+  %arrayidx = getelementptr inbounds [128 x %my.struct], ptr %p1, i64 0, i64 %index
+  %ld1 = load i8, ptr %arrayidx, align 1
+  %cmp3 = icmp eq i8 %ld1, 3
+  br i1 %cmp3, label %loop.latch, label %loop.end
+
+loop.latch:
+  %index.next = add i64 %index, 1
+  %exitcond = icmp ne i64 %index.next, 69
+  br i1 %exitcond, label %loop, label %loop.end
+
+loop.end:
+  %retval = phi i64 [ 0, %loop.latch ], [ 1, %loop ]
+  ret i64 %retval
+}
 
 declare i32 @foo(i32) readonly
 declare <vscale x 4 x i32> @foo_vec(<vscale x 4 x i32>)
 
 attributes #0 = { "vector-function-abi-variant"="_ZGVsNxv_foo(foo_vec)" }
 attributes #1 = { "target-features"="+sve" vscale_range(1,16) }
+;.
+; CHECK: [[LOOP0]] = distinct !{[[LOOP0]], [[META1:![0-9]+]], [[META2:![0-9]+]]}
+; CHECK: [[META1]] = !{!"llvm.loop.isvectorized", i32 1}
+; CHECK: [[META2]] = !{!"llvm.loop.unroll.runtime.disable"}
+; CHECK: [[LOOP3]] = distinct !{[[LOOP3]], [[META1]]}
+;.

llvm/test/Transforms/LoopVectorize/early_exit_legality.ll

@@ -49,7 +49,7 @@ define i64 @same_exit_block_pre_inc_use1() {
 ; CHECK-LABEL: LV: Checking a loop in 'same_exit_block_pre_inc_use1'
 ; CHECK:       LV: Found an early exit loop with symbolic max backedge taken count: 63
 ; CHECK-NEXT:  LV: We can vectorize this loop!
-; CHECK-NOT:   LV: Not vectorizing
+; CHECK-NEXT:  LV: Not vectorizing: Auto-vectorization of loops with uncountable early exits and outside uses of induction variables unsupported
 entry:
   %p1 = alloca [1024 x i8]
   %p2 = alloca [1024 x i8]
@@ -141,7 +141,7 @@ define i64 @loop_contains_load_after_early_exit(ptr dereferenceable(1024) align(
 ; CHECK-LABEL: LV: Checking a loop in 'loop_contains_load_after_early_exit'
 ; CHECK:       LV: Found an early exit loop with symbolic max backedge taken count: 63
 ; CHECK-NEXT:  LV: We can vectorize this loop!
-; CHECK:       LV: Not vectorizing: Some exit values in loop with uncountable exit not supported yet.
+; CHECK:       LV: Not vectorizing: Auto-vectorization of loops with uncountable early exits and outside uses of induction variables unsupported
 entry:
   %p1 = alloca [1024 x i8]
   call void @init_mem(ptr %p1, i64 1024)
@@ -167,6 +167,42 @@ loop.end:
 }
 
 
+define i64 @one_uncountable_two_countable_same_exit_phi_of_consts() {
+; CHECK-LABEL: LV: Checking a loop in 'one_uncountable_two_countable_same_exit_phi_of_consts'
+; CHECK:       LV: Found an early exit loop with symbolic max backedge taken count: 61
+; CHECK-NEXT:  LV: We can vectorize this loop!
+; CHECK-NEXT:  LV: Not vectorizing: Auto-vectorization of early exit loops requiring a scalar epilogue is unsupported.
+entry:
+  %p1 = alloca [1024 x i8]
+  %p2 = alloca [1024 x i8]
+  call void @init_mem(ptr %p1, i64 1024)
+  call void @init_mem(ptr %p2, i64 1024)
+  br label %loop
+
+loop:
+  %index = phi i64 [ %index.next, %loop.inc ], [ 3, %entry ]
+  %cmp1 = icmp ne i64 %index, 64
+  br i1 %cmp1, label %search, label %loop.end
+
+search:
+  %arrayidx = getelementptr inbounds i8, ptr %p1, i64 %index
+  %ld1 = load i8, ptr %arrayidx, align 1
+  %arrayidx1 = getelementptr inbounds i8, ptr %p2, i64 %index
+  %ld2 = load i8, ptr %arrayidx1, align 1
+  %cmp3 = icmp eq i8 %ld1, %ld2
+  br i1 %cmp3, label %loop.end, label %loop.inc
+
+loop.inc:
+  %index.next = add i64 %index, 1
+  %exitcond = icmp ne i64 %index.next, 128
+  br i1 %exitcond, label %loop, label %loop.end
+
+loop.end:
+  %retval = phi i64 [ 0, %loop ], [ 1, %search ], [ 0, %loop.inc ]
+  ret i64 %retval
+}
+
+
 ; == SOME ILLEGAL EXAMPLES ==
 
 

llvm/test/Transforms/LoopVectorize/multi_early_exit.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 4
-; RUN: opt -S < %s -p loop-vectorize | FileCheck %s
+; RUN: opt -S < %s -p loop-vectorize -enable-early-exit-vectorization | FileCheck %s
 
 declare void @init_mem(ptr, i64);
 

llvm/test/Transforms/LoopVectorize/multi_early_exit_live_outs.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 4
-; RUN: opt -S < %s -p loop-vectorize | FileCheck %s
+; RUN: opt -S < %s -p loop-vectorize -enable-early-exit-vectorization | FileCheck %s
 
 declare void @init_mem(ptr, i64);
 

llvm/test/Transforms/LoopVectorize/single_early_exit_live_outs.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 4
-; RUN: opt -S < %s -p loop-vectorize | FileCheck %s
+; RUN: opt -S < %s -p loop-vectorize -enable-early-exit-vectorization | FileCheck %s
 
 declare void @init_mem(ptr, i64);