[RISCV] Use software guarded branch for indirect jump table branch.

llvm/lib/Target/RISCV/RISCVISelLowering.cpp

@@ -21547,6 +21547,20 @@ MCPhysReg RVVArgDispatcher::getNextPhysReg() {
   return AllocatedPhysRegs[CurIdx++];
 }
 
+SDValue RISCVTargetLowering::expandIndirectJTBranch(const SDLoc &dl,
+                                                    SDValue Value, SDValue Addr,
+                                                    int JTI,
+                                                    SelectionDAG &DAG) const {
+  if (Subtarget.hasStdExtZicfilp()) {
+    // When Zicfilp enabled, we need to use software guarded branch for jump
+    // table branch.
+    SDValue JTInfo = DAG.getJumpTableDebugInfo(JTI, Value, dl);
+    return DAG.getNode(RISCVISD::SW_GUARDED_BRIND, dl, MVT::Other, JTInfo,
+                       Addr);
+  }
+  return TargetLowering::expandIndirectJTBranch(dl, Value, Addr, JTI, DAG);
+}
+
 namespace llvm::RISCVVIntrinsicsTable {
 
 #define GET_RISCVVIntrinsicsTable_IMPL

llvm/lib/Target/RISCV/RISCVISelLowering.h

@@ -400,6 +400,10 @@ enum NodeType : unsigned {
   CZERO_EQZ, // vt.maskc for XVentanaCondOps.
   CZERO_NEZ, // vt.maskcn for XVentanaCondOps.
 
+  /// Software guarded BRIND node. Operand 0 is the chain operand and
+  /// operand 1 is the target address.
+  SW_GUARDED_BRIND,
+
   // FP to 32 bit int conversions for RV64. These are used to keep track of the
   // result being sign extended to 64 bit. These saturate out of range inputs.
   STRICT_FCVT_W_RV64 = ISD::FIRST_TARGET_STRICTFP_OPCODE,
@@ -869,6 +873,9 @@ class RISCVTargetLowering : public TargetLowering {
 
   bool supportKCFIBundles() const override { return true; }
 
+  SDValue expandIndirectJTBranch(const SDLoc &dl, SDValue Value, SDValue Addr,
+                                 int JTI, SelectionDAG &DAG) const override;
+
   MachineInstr *EmitKCFICheck(MachineBasicBlock &MBB,
                               MachineBasicBlock::instr_iterator &MBBI,
                               const TargetInstrInfo *TII) const override;

llvm/lib/Target/RISCV/RISCVInstrInfo.td

@@ -69,6 +69,8 @@ def riscv_brcc      : SDNode<"RISCVISD::BR_CC", SDT_RISCVBrCC,
 def riscv_tail      : SDNode<"RISCVISD::TAIL", SDT_RISCVCall,
                              [SDNPHasChain, SDNPOptInGlue, SDNPOutGlue,
                               SDNPVariadic]>;
+def riscv_sw_guarded_brind : SDNode<"RISCVISD::SW_GUARDED_BRIND",
+                                    SDTBrind, [SDNPHasChain]>;
 def riscv_sllw      : SDNode<"RISCVISD::SLLW", SDT_RISCVIntBinOpW>;
 def riscv_sraw      : SDNode<"RISCVISD::SRAW", SDT_RISCVIntBinOpW>;
 def riscv_srlw      : SDNode<"RISCVISD::SRLW", SDT_RISCVIntBinOpW>;
@@ -1454,16 +1456,23 @@ def PseudoBRIND : Pseudo<(outs), (ins GPRJALR:$rs1, simm12:$imm12), []>,
                   PseudoInstExpansion<(JALR X0, GPR:$rs1, simm12:$imm12)>;
 
 let Predicates = [HasStdExtZicfilp],
-    isBarrier = 1, isBranch = 1, isIndirectBranch = 1, isTerminator = 1 in
+    isBarrier = 1, isBranch = 1, isIndirectBranch = 1, isTerminator = 1 in {
 def PseudoBRINDNonX7 : Pseudo<(outs), (ins GPRJALRNonX7:$rs1, simm12:$imm12), []>,
                        PseudoInstExpansion<(JALR X0, GPR:$rs1, simm12:$imm12)>;
+def PseudoBRINDX7 : Pseudo<(outs), (ins GPRX7:$rs1, simm12:$imm12), []>,
+                    PseudoInstExpansion<(JALR X0, GPR:$rs1, simm12:$imm12)>;
+}
 
 // For Zicfilp, need to avoid using X7/T2 for indirect branches which need
 // landing pad.
 let Predicates = [HasStdExtZicfilp] in {
 def : Pat<(brind GPRJALRNonX7:$rs1), (PseudoBRINDNonX7 GPRJALRNonX7:$rs1, 0)>;
 def : Pat<(brind (add GPRJALRNonX7:$rs1, simm12:$imm12)),
           (PseudoBRINDNonX7 GPRJALRNonX7:$rs1, simm12:$imm12)>;
+
+def : Pat<(riscv_sw_guarded_brind GPRX7:$rs1), (PseudoBRINDX7 GPRX7:$rs1, 0)>;
+def : Pat<(riscv_sw_guarded_brind (add GPRX7:$rs1, simm12:$imm12)),
+          (PseudoBRINDX7 GPRX7:$rs1, simm12:$imm12)>;
 }
 
 let Predicates = [NoStdExtZicfilp] in {

llvm/lib/Target/RISCV/RISCVRegisterInfo.td

@@ -167,6 +167,8 @@ def GPRNoX0 : GPRRegisterClass<(sub GPR, X0)>;
 
 def GPRNoX0X2 : GPRRegisterClass<(sub GPR, X0, X2)>;
 
+def GPRX7 : GPRRegisterClass<(add X7)>;
+
 // Don't use X1 or X5 for JALR since that is a hint to pop the return address
 // stack on some microarchitectures. Also remove the reserved registers X0, X2,
 // X3, and X4 as it reduces the number of register classes that get synthesized

llvm/test/CodeGen/RISCV/jumptable-swguarded.ll

@@ -0,0 +1,105 @@
+; NOTE: Assertions have been autogenerated by utils/update_llc_test_checks.py
+; RUN: llc -mtriple riscv32 -mattr=+experimental-zicfilp < %s | FileCheck %s
+; RUN: llc -mtriple riscv64 -mattr=+experimental-zicfilp < %s | FileCheck %s
+; RUN: llc -mtriple riscv32 < %s | FileCheck %s --check-prefix=NO-ZICFILP
+; RUN: llc -mtriple riscv64 < %s | FileCheck %s --check-prefix=NO-ZICFILP
+
+; Test using t2 to jump table branch.
+define void @above_threshold(i32 signext %in, ptr %out) nounwind {
+; CHECK-LABEL: above_threshold:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    addi a0, a0, -1
+; CHECK-NEXT:    li a2, 5
+; CHECK-NEXT:    bltu a2, a0, .LBB0_9
+; CHECK-NEXT:  # %bb.1: # %entry
+; CHECK-NEXT:    slli a0, a0, 2
+; CHECK-NEXT:    lui a2, %hi(.LJTI0_0)
+; CHECK-NEXT:    addi a2, a2, %lo(.LJTI0_0)
+; CHECK-NEXT:    add a0, a0, a2
+; CHECK-NEXT:    lw t2, 0(a0)
+; CHECK-NEXT:    jr t2
+; CHECK-NEXT:  .LBB0_2: # %bb1
+; CHECK-NEXT:    li a0, 4
+; CHECK-NEXT:    j .LBB0_8
+; CHECK-NEXT:  .LBB0_3: # %bb5
+; CHECK-NEXT:    li a0, 100
+; CHECK-NEXT:    j .LBB0_8
+; CHECK-NEXT:  .LBB0_4: # %bb3
+; CHECK-NEXT:    li a0, 2
+; CHECK-NEXT:    j .LBB0_8
+; CHECK-NEXT:  .LBB0_5: # %bb4
+; CHECK-NEXT:    li a0, 1
+; CHECK-NEXT:    j .LBB0_8
+; CHECK-NEXT:  .LBB0_6: # %bb2
+; CHECK-NEXT:    li a0, 3
+; CHECK-NEXT:    j .LBB0_8
+; CHECK-NEXT:  .LBB0_7: # %bb6
+; CHECK-NEXT:    li a0, 200
+; CHECK-NEXT:  .LBB0_8: # %exit
+; CHECK-NEXT:    sw a0, 0(a1)
+; CHECK-NEXT:  .LBB0_9: # %exit
+; CHECK-NEXT:    ret
+;
+; NO-ZICFILP-LABEL: above_threshold:
+; NO-ZICFILP:       # %bb.0: # %entry
+; NO-ZICFILP-NEXT:    addi a0, a0, -1
+; NO-ZICFILP-NEXT:    li a2, 5
+; NO-ZICFILP-NEXT:    bltu a2, a0, .LBB0_9
+; NO-ZICFILP-NEXT:  # %bb.1: # %entry
+; NO-ZICFILP-NEXT:    slli a0, a0, 2
+; NO-ZICFILP-NEXT:    lui a2, %hi(.LJTI0_0)
+; NO-ZICFILP-NEXT:    addi a2, a2, %lo(.LJTI0_0)
+; NO-ZICFILP-NEXT:    add a0, a0, a2
+; NO-ZICFILP-NEXT:    lw a0, 0(a0)
+; NO-ZICFILP-NEXT:    jr a0
+; NO-ZICFILP-NEXT:  .LBB0_2: # %bb1
+; NO-ZICFILP-NEXT:    li a0, 4
+; NO-ZICFILP-NEXT:    j .LBB0_8
+; NO-ZICFILP-NEXT:  .LBB0_3: # %bb5
+; NO-ZICFILP-NEXT:    li a0, 100
+; NO-ZICFILP-NEXT:    j .LBB0_8
+; NO-ZICFILP-NEXT:  .LBB0_4: # %bb3
+; NO-ZICFILP-NEXT:    li a0, 2
+; NO-ZICFILP-NEXT:    j .LBB0_8
+; NO-ZICFILP-NEXT:  .LBB0_5: # %bb4
+; NO-ZICFILP-NEXT:    li a0, 1
+; NO-ZICFILP-NEXT:    j .LBB0_8
+; NO-ZICFILP-NEXT:  .LBB0_6: # %bb2
+; NO-ZICFILP-NEXT:    li a0, 3
+; NO-ZICFILP-NEXT:    j .LBB0_8
+; NO-ZICFILP-NEXT:  .LBB0_7: # %bb6
+; NO-ZICFILP-NEXT:    li a0, 200
+; NO-ZICFILP-NEXT:  .LBB0_8: # %exit
+; NO-ZICFILP-NEXT:    sw a0, 0(a1)
+; NO-ZICFILP-NEXT:  .LBB0_9: # %exit
+; NO-ZICFILP-NEXT:    ret
+entry:
+  switch i32 %in, label %exit [
+    i32 1, label %bb1
+    i32 2, label %bb2
+    i32 3, label %bb3
+    i32 4, label %bb4
+    i32 5, label %bb5
+    i32 6, label %bb6
+  ]
+bb1:
+  store i32 4, ptr %out
+  br label %exit
+bb2:
+  store i32 3, ptr %out
+  br label %exit
+bb3:
+  store i32 2, ptr %out
+  br label %exit
+bb4:
+  store i32 1, ptr %out
+  br label %exit
+bb5:
+  store i32 100, ptr %out
+  br label %exit
+bb6:
+  store i32 200, ptr %out
+  br label %exit
+exit:
+  ret void
+}